Products & Specifications

Cast ingots of roughly 20–25 kg, used by foundries, die-casters and rolling mills for remelting. Supplied strapped on pallets with heat numbers and a mill test certificate.

Homogenised round logs for extrusion presses, available in common diameters from 6" to 10" and cut to the length you need. 6063 is the go-to grade for windows, doors and profiles.

Flat-rolled sheets, plates and coils in mill, plain or chequered finish. Used for roofing, cladding, kitchenware, transport bodies and general fabrication.

Sorted and baled scrap for secondary smelters. See our Scrap page for the full range of grades.

Electro-refined copper plates, the purest commercial form of copper. Supplied in strapped bundles of about 2–2.5 MT for rod mills, alloy makers and cable manufacturers.

Continuous-cast ETP wire rod in coils, plus drawn round rods. Used to draw electrical wire, busbars, earthing strips and winding wire.

Seamless copper tubes in straight lengths and pancake coils for HVAC, refrigeration, plumbing and medical gas lines.

Bare bright wire and other sorted copper scrap for smelters and refiners. See our Scrap page for the full range of grades.

Plates, sheets, flats and rounds in structural and engineering grades. Good weldability and machinability for fabrication, machinery and construction.

Sheets, coils, bars and fittings in austenitic and ferritic grades. 304 suits food and general use, 316/316L suit marine and chemical service, and 409 is used for exhausts.

Round, square and rectangular pipes for water lines, structural frames, scaffolding and process piping, supplied to the standard you specify.

Thermo-mechanically treated (TMT) ribbed bars, 8mm to 32mm, for reinforced concrete in buildings, bridges and infrastructure.

Blast-furnace iron cast into pigs, used as clean charge material by foundries and electric arc furnaces.

Direct reduced iron with low residual elements, used in induction and arc furnaces as a substitute for scrap.

Spheroidal graphite iron pipes and castings with high impact strength, used for water mains, sewage lines and valve bodies.

Mild steel billets for re-rolling mills, and rounds for forging and machining.

Special High Grade zinc ingots of about 25 kg for galvanizing baths, brass mills and zinc oxide producers.

Zinc-coated steel sheets and coils for roofing, ducting, panels and appliance bodies.

Fine zinc dust for zinc-rich paints, chemical reduction and metallurgical use.

Die-casting alloys for hardware, locks, fittings and automotive parts, giving a fine surface finish.

Refined pure lead ingots for battery oxide, alloying, cable sheathing and shielding.

Rolled lead sheets for X-ray room shielding, roofing flashings, soundproofing and tank linings.

Extruded lead pipes for acid handling and other chemical-process lines.

Lead oxide powders for batteries, glass, ceramics and anti-corrosive primers.

Electrolytic nickel for stainless steel melting, plating and alloy production.

Pure nickel and nickel alloy plates for caustic handling, heat exchangers and process vessels.

Seamless nickel and nickel alloy tubes for condensers and chemical lines.

Bars, forgings and fittings in nickel-based superalloys for severe-service applications.

Refined tin ingots for solder makers, tinplate lines, bronze and chemical production.

Solder bars, wire and sticks for PCB assembly, electrical joints and plumbing.

Tin-coated steel sheets and coils for cans, closures and packaging.

Tin-bearing scrap and dross for secondary refiners.

Pure magnesium ingots used as an alloying element in aluminium and for desulphurising steel.

Alloy billets for extrusion and forging of light structural parts.

Rolled sheets for engraving plates, electronics housings and lightweight panels.

Clean solids and turnings for remelting.

Roughly twice the strength of 304/316 with strong resistance to chloride stress cracking. Used in offshore, desalination and pulp & paper plants.

Higher-alloy duplex for seawater, subsea and other very aggressive chloride environments.

Nickel-chromium superalloys that keep their strength at very high temperatures, used in turbines, furnaces and aerospace.

Nickel-copper alloys with excellent resistance to seawater and hydrofluoric acid.

Nickel-molybdenum-chromium alloys for harsh chemical processing and pollution-control equipment.

Deoxidiser and silicon source for steel and cast iron, supplied as lumps sized 10–50mm or 10–100mm.

Adds manganese for strength and removes sulphur and oxygen in steelmaking.

The main chromium source for stainless and alloy steel production.

Used in aluminium alloys, silicones and the chemical industry.

Improves hardenability, high-temperature strength and corrosion resistance in alloy steels.

Refines grain size and increases the strength of HSLA steels, rebars and tool steels.

Hot-rolled low and high carbon wire rod in coils for drawing into wire, nails, mesh and fasteners.

Binding wire, galvanized wire and stainless wire for construction, fencing and industry.

Diamond-mesh sheets for walkways, guards, fencing and architectural screens.

Free-cutting brass rods for machined parts, plus brass sheets and tubes for fittings and decorative work.